The world of sanitary and storm sewers has seen a growing need for larger diameters to carry water. As pipe sizes increase, designing manway access becomes more challenging as larger pipes necessitate larger manholes or concrete boxes. It's not uncommon to resort to cast-in-place structures as the primary solution, which can be both time-consuming and expensive. However, with ongoing technological advancements and the increased use of thermoplastic pipe materials, alternative manhole solutions have been steadily gaining popularity. Many designers and regulators are recognizing the benefits of exploring alternatives to the traditional standard concrete manhole or box structures.

I know you all have been waiting with baited breath to find out the in's and out's of the last two considerations when evaluating a large diameter flow thermoplastic sewer solution. To recap, typically, the larger diameters tend to have far less directional changes and lateral connections. Also, interceptors tend to have deeper heights-of-cover in gravity flow applications. Many interceptors are designed to flow 50% to 70% full, with minimal slope, deep covers, and within groundwater (requiring dewatering installation). It is also not unusual for new interceptors/trunks to be miles of pipe using several diameters.

The need for large and ultra-large sanitary sewers is growing as community populations and conveyance flow requirements increase. Many expert studies have estimated that the sanitary sewer market will grow at a 6% compound annual growth rate (CAGR) in the coming years. With this growth, alternative materials, such as thermoplastics, are being designed more frequently due to the corrosive sanitary sewer environment.

You may be new to DuroMaxx® Steel Reinforced Polyethylene (SRPE for short) pipe. If you are, here is a brief introduction. What is DuroMaxx SRPE? DuroMaxx is

Over the two decades I’ve been involved with Contech A-2000™ PVC Pipe, there are a handful of concerns I am asked about once-a-year, it seems. One of them is

U.S. sewer infrastructure continues to see increasing rates of sanitary and storm sewer deterioration and a need for cost-effective rehabilitation solutions.

Recently, I had the opportunity to participate in a webinar covering multiple states and 300 participants. The topic was PVC pipe applications and design

Hello all… how about a quick blog on PVC pipe and UV protection? I am often asked about the effects of UV exposure caused by sunlight on PVC sewer pipes and how

I’ve recently been seeing engineers choosing what I feel are inappropriate Manning’s “n” coefficients for sewer design. Some choose too conservative values,

There are a whole lot of different types of pipes and pipe joints used in the civil engineering industry. This blog will focus on those associated with